#test_blinkLED.py

import RPi.GPIO as GPIO
import time

# by D@CC
# on 2021GJul03

progName="test_blinkLED.py"
print("progName:"+progName)
print("pushButton: enable High")
# yelLED = GPIO17 (phy pin: 11)
# redLED = GPIO27 (phy pin: 13)
led_pin = 27

# redLED = GPIO22 (phy pin: 15)
pushB_pin = 22    

GPIO.setmode(GPIO.BCM)
GPIO.setup(led_pin, GPIO.OUT)
GPIO.setup(pushB_pin, GPIO.IN)
while True:
    GPIO.output(led_pin,1) #on
    time.sleep(1)
    GPIO.output(led_pin,0)  #off
    time.sleep(1)
    pushB=GPIO.input(pushB_pin)
    print("pushB:",pushB)
#end while