Station 58:96:30:aa:4d:00 (on wlan0)
	inactive time:	0 ms
	rx bytes:	2127309
	rx packets:	13761
	tx bytes:	475525
	tx packets:	3917
	tx failed:	18
	signal:  	-46 dBm
	tx bitrate:	65.0 MBit/s
	rx bitrate:	52.0 MBit/s
	authorized:	yes
	authenticated:	yes
	associated:	yes
	WMM/WME:	yes
	TDLS peer:	yes
	DTIM period:	3
	beacon interval:100
	short preamble:	yes
	short slot time:yes
	connected time:	7156 seconds
	current time:	1697934033060 ms
/Environ.sh as of 2023JOct21 by D@CC
Timezone    America/Toronto
Sat 21 Oct 20:20:33 EDT 2023
on Pi Zero (non-W), the OS estimates the best date/time doh!
_Flb01S032G
AsOf            : 2023JOct19
Provenance      : Flb01S (from Flb00 had uSD blk issue)
                : Fla92S (55S orignally failed, then refmt)
PRETTY_NAME="Debian GNU/Linux 12 (bookworm)"
Raspbian 32 or 64:
64
               total        used        free      shared  buff/cache   available
Mem:           3.7Gi       429Mi       2.7Gi        40Mi       690Mi       3.3Gi
Swap:           99Mi          0B        99Mi
Model		: Raspberry Pi 400 Rev 1.1
Serial		: 100000002c9ae46e
Overscan        : Disabled  on  Zero 2 is best
Web access is ONLY if an IP address appears below
10.0.0.233
WiFiMnemonic FL : classiccar925
WiFiMnemonic ON : dogyrbeer
Interfaces:
/dev/gpiochip0
/dev/gpiochip1
/dev/gpiomem
/dev/i2c-1
/dev/i2c-20
/dev/i2c-21
/dev/spidev0.0
/dev/spidev0.1
Ext.Flash Drive (if connected):
/dev/sda1        29G  3.6G   26G  13% /media/pi/FLA94D032G
Accessories.txt:
AsOf            : 2023JOct19
PiFont          : Monospace Regular 10
RDCMnemonic     : LydieArthur$
Printer ON      : Brother_HL-5470 Series
Printer FL      :xCanon_MX420_series NW Printer
GPIO            : Mak Pi ADC
USB             : Pi Pico on Maker Pi Pico board
Pico Serial     : 4F31
ALARM           : Visual:nsxiv   Pictures/alarm.png
ALARM           : Audible:aplay Music/alarm.wav
AUDIO           : HDMI, BT MiniTunes speaker
Program1        : MakerpHATDemocode.py
Program2        : read_GPIO_D.py
Program3        : sh pir2.sh

Issues.txt:
Lists current issues for this boot volume:
_Flb01S032G containing 64-bit OS: Bookworm
01 2023JOct20 uSD adapters cause uSD speed test failures.
02 2023JOct21 OnBoard kb fails
03 2023JOct21 >$ Intermittent! Sometimes "more" of a short file pauses, 
                  waiting for a ctrl-C (as if the file fills the screen)
                 This started at about 2:30am on both Bookworm OS on Pi400:e46e
                 but _Fla99 works fine on Pi400:e46e with Bullseye OS
                 This issue disappeared, later in the day. Doh!!
                 Then the issue reappeared. Doh!!
                 It seems to re-appear after I plug in (live) a uSB OS without 
		  a power-off, after booting from the SSD on a Pi400. 
                 Sometimes it resets, but I don't know how to cause the reset.
	Fix: I replaced all uses of "more" by "cat" in the .sh files
/stored in /home/pi/Desktop/IX_assets/
/Issues.txt end
Hit 'Q' to dismiss the Alarm message
To exit, close Geany

/IX_Log_output.txt