Pi: Installation of 32 bit Raspbian NOOBS Lite (142)

Steps to install 32-bit NOOBS Lite.

• 1. Label the microSD card, put it in the adapter and insert it in a PC for formatting.
     I label each of my uSD cards with a unique number.
• 2. Download imager.exe (for Windows-10) from raspberrypi.org/downloads.
• 3. Install the imager on Windows-10.
• x. (Not Necessary) download NOOBS Lite (Network instll only) into folder 142.
       SHA-256:7bb002bc17689fdd14a3e81bd733e317b901746c65e0c5dcc611f954b00ecaae
• 4. With imager: select Format, select the uSD card, and click WRITE (takes 2 min).
• 5. With image: select "Raspberry Pi OS (32-bit), select the uSD card and click WRITE (takes 5-10 min, then verifies.)
• 6. Remove the uSD card from the PC and remove it from the Adapter.
• 7. Insert the uSD card in the Raspberry Pi.
• 8. Plug in all the cables (power last).
• 9. Power on (should see the "Buster" desktop).
• 10. Click Next.
• 11. Change or keep the PW.
• 12. Set up TimeZones etc.
• 13. Wait for it to check & update the OS (downloading ....).
• 14. The Raspberry Pi Linux system is ready to be used.

For instructions how to install the PiR2 system click on Source 02 below

Web Sources

Noobs Instructions

PiR2 Additional Information

WebMaster: Ye Old King Cole

Click here to return to ePC Articles